Becker MAP PILOT Instructions For Use Manual page 30

>>> NAVIGATION MODE
Entering a POI directly by name
> In the POI menu, select
> USE
.
name
> FR
> ES
> Enter the desired point of interest or
part of the name.
> To confirm the previous input, select
or press and hold the rotary con-
trol/push button.
The Becker® MAP PILOT displays in a
list all the points of interest corresponding
to the name entered.
Note:
The search radius is limited to 125 miles
around your current position.
A maximum of 50 points of interest are
displayed.
> Select the desired destination from the
list.
> Select
Start guidance
guidance to the point of interest straight
away.
29
Entering a POI directly by phone number
> In the POI menu, select
POI search by
phone number
> Enter the phone number (or a part of it)
of the desired point of interest.
When sufficient numbers have been se-
lected the Becker® MAP PILOT will au-
tomatically switch to a list from which you
can select the point of interest. However,
you can switch to the list before this by
pushing the rotary control/push button
downwards. You can then select the point
of interest from the list.
Note:
The search radius is limited to 125 miles
around your current position.
> Select the desired destination from the
list.
> Select
Start guidance
to begin route guidance to the point of interest straight
away.
Selecting a destination from the
map
POI search by
. You can select a destination straight from
the map.
> Select
The map display appears.
> Search for the desired position.
Note:
Turn the rotary control/push button to
change the scale of the map display.
Push the rotary control/push button to
move the displayed cursor to the desired
position.
> Press the rotary control/push button.
to begin route
from the destina-
Select on map
tion input menu.