Displaying Tmc Messages - Becker MAP PILOT Instructions For Use Manual

>>> NAVIGATION MODE
Traffic announcements us-
> USE
ing TMC
> FR
Your Becker® MAP PILOT can receive
traffic announcements (TMC messages)
> ES
from radio stations.
Note:
TMC is not available in all countries.
Traffic announcements are transmitted by
radio stations via the TMC (Traffic Mes-
sage Channel) in addition to the radio
programme and are received and analyzed
by the navigation system. Receiving traffic
announcements is free of charge.
33
Note:
As the traffic announcements are trans-
mitted by radio stations, we cannot as-
sume responsibility for the completeness
or accuracy of the announcements.
The Becker® MAP PILOT constantly
checks whether there are any relevant an-
nouncements for the route that has been
set.
If the continuous checks determine that a
traffic announcement is relevant to route
guidance, the unit can automatically re-
calculate a new route to the destination
(See "Traffic settings" on page 52.).

Displaying TMC messages

Once you have connected the Becker®
MAP PILOT to the unit holder, your
Becker® MAP PILOT will receive up-to-
date traffic announcements and dynamic
route calculation will be enabled (traffic
jam diversion). You can also view traffic
announcements directly.
Settings for TMC can be made as de-
scribed under "Traffic settings" on
page 52.
> Select
from the main menu.
TMC
The message list appears.