C Safety And Emc Regulatory Statements; Safety Information - HP ProCurve Wireless Access Point 530 Installation And Getting Started Manual

Safety and EMC Regulatory Statements

Safety Information

WARNING
CAUTION
Grounding
Depending on the product model, your product will be classified either as a
safety class I or safety class II compliant device. Class I devices require a
connection to earth ground (3-terminal plug), while class II devices incorporate
a 2-terminal plug.
Class I: There must be an uninterruptible safety earth ground from the main
power source to the product's power cord or supplied power cord set.
Whenever it is likely that the protection has been impaired, disconnect the
power cord until the ground has been restored.
Class II: Safety class II-compliant devices include supplemental insulation to
protect against electric shock, and do not require a connection to earth
ground.
For LAN connections:
■
■
Documentation reference symbol. If the product is marked with this
!
symbol, refer to the product documentation to get more information
about the product.
A WARNING in the manual denotes a hazard that can cause injury or
death.
A CAUTION in the manual denotes a hazard that can damage the
equipment or create a non-compliant condition.
Do not proceed beyond a WARNING or CAUTION notice until you have
understood the hazardous conditions and have taken appropriate steps.
If your LAN covers an area served by more than one power distribution
system, be sure their safety grounds are securely interconnected.
LAN cables may occasionally be subject to hazardous transient voltages
(such as lightning or disturbances in the electrical utilities power grid).
Handle exposed metal components of the network with caution.
C
C-1