Avocent ESP Serial Hub Installer/User Manual page 82

72 ESP Serial Hub Installer/User Guide
Table 8.2: ESP-View Utility Status Display (Continued)
Field
Speed
Size
Parity
Stop
Flow Control
The right panel contains a graphical display of a DB-9 connector, which indicates the state of the
control signals (red = low, green = high). The transmit and receive signals are always red. If any
control signals change, the colors will reflect the change.
The area under the connector graphic will contain a rotating circle when status is being monitored.
To use the status function:
1. Launch the ESP-View utility.
2. Click the Diagnostics tab or select Diagnostics form the ESP-View utility menu.
3. In the Settings area, select the ESP hub port number or All
4. Enter a sampling rate, which specifies how often the hub will be polled.
5. To start polling, click Play. A rotating circle in the lower right corner of the window indicates
that polling and display updating are occurring.
6. To pause polling, click Pause. To resume, click Pause again.
7. To stop polling, click Stop.
Description
Configured baud rate for the serial port.
Configured data size (bits per character) for the serial port.
Configured parity for the serial port.
Configured number of stop bits for the serial port.
Configured flow control for the serial port.
.