Table of Contents
Advertisement
3.
To set the level of logging performed by the ESP hub applications, enter
log level in the range of no logging to verbose.
4.
To display log information provided by the ESP hub kernel, enter
5.
To run the datascope feature, enter
selected, the datascope function will run until you press any key on the keyboard.
The datascope shows all data sent and received on the specified serial port. Each line displays
16 bytes in hex and ASCII.
6.
To escape to a shell, enter
on the advice of Avocent Technical Support.
. You will be prompted to select a port. Once the port is
4
. This feature requires a hardware jumper and should be used only
5
Chapter 5: Configuration Utility
. You may select a
2
.
3
53
Hide quick links:
Advertisement
Table of Contents
