Table of Contents
Advertisement
52
ESP Serial Hub Installer/User Guide
To display general statistics:
1.
From the Top Menu, enter
2.
Enter
to select General statistics.
1
Displaying Port Statistics
The Port Statistics display includes the information described in Table 4.3 on page 39 for one or all
ports. All values are cumulative since the ESP serial hub was last reset.
To display port statistics:
1.
From the Top Menu, enter
2.
Enter
to select Port statistics. The Port Selection Menu will be displayed.
2
3.
Enter the number corresponding to a port or
Displaying Connection Status
The Connection Status display has two sections: Serial Port Active Connection Status and Port
Redirection Connections.
The Serial Port Active Connection Status section includes the information described in Table 4.4
on page 39 for one or all ports.
The Port Redirection Connections section includes the information described in Table 4.5 on
page 40 about the servers that are connected to one or all of the ESP serial ports. This display is
meaningful only when a serial port is being accessed using the serial redirection
connection method.
To display connected server information:
1.
From the Top Menu, enter
2.
Enter
to select Connection Status. The Port Selection Menu will be displayed.
3
3.
Enter the number corresponding to a port or
Displaying and Using Debug Features
The Debug Menu contains commands to display or control log information, run the datascope
feature or escape to a shell.
NOTE: Debug Menu commands should only be used on the advice of Avocent service personnel.
These debug operations are not available in the web interface. You may use the ESP-View
diagnostic utility from the web interface; see ESP-View Diagnostic Utility on page 67.
To display or control log information:
1.
From the Top Menu, enter
2.
To display log information provided by the ESP hub applications, enter
to select Status. The Status Menu will be displayed.
5
to select Status. The Status Menu will be displayed.
5
to select all ports.
0
to select Status. The Status Menu will be displayed.
5
to select all ports.
0
6
to select Debug. The Debug Menu will be displayed.
1
.
Hide quick links:
Advertisement
Table of Contents
