Avery Dennison ALS 330 User Manual page 62

Operators Manual
ALS 330/430
#!SR__ The machine is set to on. The product sensor is enabled and labelling can
restart.
For a full automatic operation, the following procedure in case of an error is required:
#!ERRF
#!CLRE
#!SR__
Bit definition in error flag
Error number Error message in display
0 E__0
1 E__1
2 E__2
3 E__3
4 E__4
5 E__5
6 E__6
7 E__7
8 E__8
Bit definition in warning flag
Warning Message in display
0 W__0
1 W__1
2 W__2
3 W__3
4 W__4
5 W__5
6 W__6
7 W__7
Release 8/07
Request error
Clear error message after fixing the error. The labeller shows „INIT"
Clear INIT message
Page 54
Error description
Pressure roller open
End of material (4 missing labels)
EP-applicator error
checksum error configuration data
checksum error parameter bank
Error 10V low
Error 24V low
missing label on product
Error motor driver
Warning description
Next product start before finished
Product start but no material not initialised
EEPROM error during write
Interface warning
APSF speed too fast
End of material (OD-Control)
too many products
Loop not ready (720)
Serial interface