Handling The Menu - Avery Dennison ALS 230 User Manual

Operators Manual
ALS 230

6.1 Handling the menu

The menu structure is shown in the following table. By means of the key PRIOR you switch to
the prior function, and with the key NEXT to the next following function in the menu.
If you press the key ENTER the current parameter value of a function is shown. The current
parameter value can be changed with the keys PRIOR FUNCTION or NEXT FUNCTION.
Values are stored by pressing the key ENTER.
Display Function of the parameter
DTST Test run without labels
P_S_ Product sensor detects at leading or
trailing edge of product
MACH Machine type
MDIR Motor running direction for left or right
hand
MLAB Handling of missing label
APSF Automatic product speed follower
APPL Direct dispense mode, or applicators
I_CH Test of inputs
O_CH Test of outputs
FACT Reset of all parameters to default values
BAUD Baudrate of the interface
PARI Parity bit
SBIT Number of Stop bits
DBIT Number of data bits
RECY Recycle (simulates max labels/min)
DIST Distance label sensor to dispensing edge
LABC Number of dispensed labels
QUIT Return to extended standard menu
Release 12/07
Possible data entry
LEDG, TEDG
230, 720, 330, 430
<---- --->
NONE, WARN, ERR1, ERR2,
ERR3
YES, NO
DIR, ASA, EP, RVEP
YES, NO
NONE, 300 to 192%
NO, 0PRT, ODD, EVEN
1 bit, 2 bit
7 bit, 8 bit
see text
10 ... 999 mm
see text
Page 46 Configuration