Avery Dennison ALX 92x Operating Manual page 5

09/06 Rev. 3.06-01
A Optional: Mini-DIN connector
B Optional: Applicator Interface (AI)
C Connection Rotary Encoder
D Power switch
E Power supply
F Ethernet interface
G Status-LED/Ethernet
H RS232 interface
I Centronics interface
J 2x USB interface type B (device)
K USB interface type A (host)
L Card slot
M Optional: Cable duct for OD control
N Card slot
O Signal interface USI
OPERATING MANUAL
To connect an external operation panel
For controlling nearly arbitrary applicator types
For automatic speed adaption
Is not yet supported
Turns the device on/off. An additional switch is located on the control panel
Connection to the power supply using the power cable provided
To connect to an „Ethernet 10/100 Base T" network
For serial transfer of print data
For parallel transfer of print data (cable is inclusive)
To connect devices (e.g. keyboard, scanner)
For transfer of print data
For CompactFlash cards; used for storing fonts, logos, graphics, etc.
To connect a photoelectric barrier, which checks the outer diameter of the la-
bel material roll
For SD/MMC cards
Is not yet supported
4 inputs / 8 outputs
optional with 5 V or 24 V signal voltage
ALX 92x
5
Device Description