Avermedia AVerTV 6.3 User Manual page 63

To modify the multi-channel preview settings:
1. Click the Setup button
Preivew on the left pane.
2. Here you can determine preveiw cell numbers from the drop-down list (2x2~8x8).
3. You can also specify the preview delay time (1~99 sec) in the text box.
4. Select the check box if you want to mute the audio when previewing channels, always
start multi-channle preview in full screen, or always start multi-channle preview from
the first channel.
To select Source Resolution and Sample Rate, please do the following steps:
1. Click the Setup button
AVerMedia device in the left pane.
2. Then click the Digital or Analog TV icon on the left pane and select Preview.
3. Here you can select Video Format and Audio Format from the drop-down list.
Note: Basically the higher source resolution and smaple rate you have, the better visual and audio
quality you get; however, it may consume larger amounts of CPU resources. Please adjust it
based on your PC hardware.
4. Click Apply to save the setting and click OK to exit the current dialog box.
and in the Setup dialog box, select Multi-Channel
(This picture is only for reference.)
and in the Setup dialog box, select an available
59