Avermedia AVerTV 6.3 User Manual page 25

● Select a desired button and choose a new command from the right pane of the dialog box.
Then click Assign.
● From the right pane of the dialog box, drag the desired command and drop it on the remote
button which you want to change the definition.
3. Click Apply to save the settings.
4. Click Clear All to delete all definitions of the remote control or click Default to revert
to the factory setting.
Note: For the following situations, please select RM_USB_FP from the Type
define a function for a certain button:
1. Your device uses external USB remote sensor and the remote control Part No. is "FP" or "KH".
2. Your product is AVerTV Volar GPS 805.
(This picture is only for reference.)
21
drop-down list
to re-