Avermedia AVerTV 6.3 User Manual page 23

Stand By: Stand By is a state in which your monitor and hard disks turn off, so that your
computer uses less power.
Hibernate: Hibernation is a state in which your computer shuts down to save power but first
saves everything in memory on your hard disk.
Please do the following:
1. First, Click the Setup button
on the left pane.
2. By default, the system is set to enable the Stand By/Hibernation option. What you have to
do is to choose the desired power-saving settings. If your computer has a problem with
coming out of Stand By or Hibernate mode, please clear the Stand By/Hibernate option.
3. Then press the Sleep button on the remote control repeatedly to set the execution time.
OR,
1). Right-click on the TV monitor, point to Sleep and select the desired mode.
2). Right-click on the TV monitor again, point to Sleep and choose an execution time.
3). The time setting will be displayed on the TV monitor. For details, please see the
description below.
Time setting mode
Sleep 30/60/90/120 Minute(s)
and in the Setup dialog box, click Miscellaneous icon
(This picture is only for reference.)
Description
Your computer will go into Stand By or Hibernate mode in
30/60/90/120 minutes.
19