Specifying A Channel Name Or Description - Avermedia AVerTV 6.3 User Manual

5. If you just want to adjust individual volume level, select Configure the settings only
for single channel and repeat step 3 and 4 to increase or decrease volume.
6. To apply the converted settings to all channels, click Apply All button
7. Click Default button
4.7

Specifying A Channel Name or Description

To assign a channel name or specify a description:
1. Click the Setup button
Digital TV icon on the left pane.
2. Under the Name column, double-click the text box of the channel you want to assign a
name or description.
3. Type in the channel name or description, then press Enter.
OR,
1. Click the Setup button
Digital TV icon on the left pane.
2. Click Advance located at right-lower corner in the Program Information section. Then
the Advance Program Configuration dialog box will appear.
3. In the dialog box, select the channel/program you want to assign a name or description.
4. In the Name text box, type in the desired name or description. Press Apply to save the
settings and click OK to exit the dialog box. Or you can press Cancel to abort without
saving.
(This picture is only for reference.)
if you want to revert the factory settings.
and in the Setup dialog box, click the Analog TV or
and in the Setup dialog box, click the Analog TV or
52
.