The application comes with a default frequency table therefore the application will use
this table to search for active channels/programs. If you want to terminate the searching
process, just click Stop.
5. You can check the scanning progress from the progress bar. After scanning, the active
TV/Radio channels will be listed inside the box. Click Apply to save the scanned channels.
4.1.2 Scanning Channels (For Advanced Users)
1. Click Advance located at right-lower corner in the Program Information section. Then
the Advance Program Configuration dialog box will appear.
2. If you don't want to miss any channels, click All Frequencies Scan.
(This picture is only for reference.)
(This picture is only for reference.)
31