Changing Signal Source; Sound Controlling (Optional); Color Adjustment (Optional) - Avermedia AVerTV 6.3 User Manual

4.13

Changing Signal Source

There are two ways to change signal source:
․ To switch between TV and radio / external video signals, click the Radio Source button
or Video Source button
․ Right click on the left pane of the control panel and a pop-up menu appears. Choose the
desired signal source.
4.14

Sound Controlling (Optional)

This function provides a variety of sound effects.
1. Right click on the TV monitor. When a pop-up menu appears, select Individual
Channel Setting. Or click Program List button
click Individual Channel Setting button
2. When a dialog box appears, select Sound Mixer tab.
3. Choose the desired sound effects from the drop-down list.
4. Then use
5. If you just want to adjust sound effects of one specific channel, select Configure the
settings only for single channel and repeat step 3 and 4.
6. To apply the converted settings to all channels, click Apply All button
Click Default button
7.
4.15

Color Adjustment (Optional)

If your device supports the 713x chip, color adjustment will be enabled. Try the provided
options to get desired color.
on the control panel.
(This picture is only for reference.)
(This picture is only for reference.)
, or the slider to control the "Stereo", "Bass" and "Treble" level.
if you want to revert the factory settings
.
61
on the control panel and then
.
.