Adding And Deleting Program Lists - Avermedia AVerTV 6.3 User Manual

4.3

Adding and Deleting Program Lists

Selecting a program list allows you to switch between the channels of the selected program
list only when pressing the Channel Up/Down button. If you want to add or delete a
program list, do the following:
To add a new program list:
1. Click the Setup button
Digital TV icon on the left pane.
2. Click New and the Program List dialog box will then
appear (as shown at right).
3. Type in a program list name and click OK.
4. Click Program Scan and click Yes to continue the
scanning process.
5. Available channels will then be listed in the Program Information and now you can
delete the unwanted programs by clearing the check box.
6. Click Apply to save the setting and click OK to exit the current dialog box. Or you can
click Cancel to revert to the original settings.
OR,
If you don't want to scan programs every time creating a new program list, you can use
Copy function.
1. From the program drop-down list, select the program list that you
want to duplicate.
2. Click Copy and the Program List dialog box will appear.
3. Type in desired name and click OK.
4. Finally, just like the steps described above, clear the check mark next to the
unwanted channels.
To delete a program list:
1. Click the Setup button
Digital TV icon on the left pane.
2. From the program drop-down list, select the name of the group that
you want to remove.
3. Click Delete to remove the selected program list.
and in the Setup dialog box, click the Analog TV or
(This picture is only for reference.)
and in the Setup dialog box, click the Analog TV or
49