Table of Contents
Advertisement
Memorizing TV Channels
Auto-scan will search and memorize all channel line up in your area. So when you
browse through programs it will skip all the unselected channels. In the Channel
Setup dialog box, C H column, all selected channels are marked with check. If you
haven't done this when you first started using the application, simply follow the
auto-scan procedures below. (Refer to section titled, Skipping Unwanted Channel,
for more detailed information to exclude selected channel.)
To auto-scan TV channels:
1. Click the
dialog box will then appear.
2. In the Channel Group drop-down list, choose to auto-scan
Default Air or Cable TV channels.
3. Click Scan.
The application has a default frequency table. When you
click S c a n, the application will use the frequencies in
this table and search for the active channels. Active
channels will then be memorized by the application.
4. You can terminate the searching process anytime. Just
click Stop.
5. Check and verify that you can access all the TV channels
(Refer to section titled, Selecting a TV Channel , for more
detailed information regarding channels access).
6.
If there are channels missing from the channel memory, click
All Channel Scan
repeat the auto-scan. The following message will appear:
7.
Click
application will then scan frequencies starting from 54 MHz
to over 800 MHz, increasing by 1 MHz at a time. The
application will check these frequencies for active channels,
memorizing those that are.
Video Configuration
in the Channel Setup dialog box and then
to start all channel auto-scan. The AVerTV USB
Yes
button. The
Channel S
etup
11
Advertisement
Table of Contents
