Rack Mounting - Avaya P333T User Manual

Chapter 4 Installation and Setup
Note: Use Octaplane cables to interconnect with other switches.

Rack Mounting

The Avaya P330 case fits in most standard 19-inch racks. Avaya P330 is 2U (88mm,
3.5") high.
Place the Avaya P330 in the rack as follows:
1 Snap open the hinged ends of the front panel to reveal the fixing holes.
2 Insert the unit into the rack. Ensure that the four Avaya P330 screw holes are
aligned with the rack hole positions as shown in Figure 4.1.
Figure 4.1
3 Secure the unit in the rack using the screws. Use two screws on each side. Do
not overtighten the screws.
4 Snap closed the hinged ends of the front panel.
5 Ensure that ventilation holes are not obstructed.
20
Avaya P330 Rack Mounting
Avaya P333T User's Guide