Avaya P333T User Manual page 96

Chapter 6 CLI – Layer 2
Output Example:
P330-N> dir
M# file
-- ----
1 Booter_Image
1 module-config
1 stack-config
1 EW_Archive
2 Booter_Image
2 module-config
2 EW_Archive
Output Fields:
Field
M#
file
ver num
file type
file location
file description
Note: If the N/A is displayed for the EW_Archive file, this means that the Device
Manager S/W is not loaded correctly. Download the Device Manager S/W again.
80
ver num file type
-------- ----------
3.5.17 SW BootImage
N/A Running Conf
N/A Running Conf
N/A SW Web Image
3.2.5 SW BootImage
N/A Running Conf
N/A SW Web Image
Description
The switch number
There are several files loaded into the switch's memory:
• module-config – file which contains the configuration
settings made to this switch
• stack-config – file which contains the configuration settings
made at the stack level (for example IP address of the stack)
• EW_Archive – file which contains the Device Manager
(Embedded Web) software
S/W Version number – relevant only for the Device
Management S/W
There are several file types:
• Running Conf – the configuration currently in use and the
startup configuration in the P330-ML, P333R and P333R-LB.
• SW Web Image – Device Manager S/W archive file
Type of internal memory into which the file is loaded
Description of the file
file location file description
------------- ----------------
Nv-Ram Booter Image
Ram Module Configuration
Ram Stack Configuration
Nv-Ram Web Download
Nv-Ram Booter Image
Ram Module Configuration
Nv-Ram Web Download
Avaya P333T User's Guide