The Device Trap Managers Table - Avaya P330 User Manual

The Device Trap Managers table is used to configure the IP addresses of
the trap managers and their trap reporting statuses for device wide traps.
Traps include power, fan, faults, and module insert/remove traps.
The following table provides a list of device trap types, their associated
icons, and their descriptions.
For information on adding and removing trap managers and editing their
trap reporting statuses, refer to
page
130
Table 14-1. Device Trap Types
Icon Trap
Trap Enable
Power Supply Traps
Fan Traps
Fault Traps
Module Insert
Remove Traps
Configuration
Changed Traps
IP VLAN Violation
Traps
IP Access Control
Traps
Duplicate IP Traps
133.
Description
Enables trap reporting for the selected
manager.
The trap reports the failure of a PSU.
The trap reports the failure of a fan.
A group of traps that report a fault in
the device.
The trap reports the insertion or
removal of a module in the device.
A group of traps that report a change in
the configuration of the device.
The trap reports the reception of a
packet tagged with a VLAN ID not
equal to the IP interface of the router.
A trap that reports the arrival of a
packet which is assigned not to enter
the router.
A trap that reports that a user has
configured a device on the network
with an IP address that is already being
used by the router.
"Editing the Trap Managers Table" on
Avaya P330 Manager User Guide