Avaya P330 User Manual page 61

The following table lists the QoS fields and their descriptions.
RTCP Monitoring
RTCP is an IP protocol that is used to monitor the quality of RTP packets.
Quality is measured in terms of delay, jitter, and packet loss.
If RTCP monitoring is enabled, the VoIP engines send RTCP packets to the
RTCP monitor. You must configure an IP address for the RTCP monitor,
and determine intervals at which the RTCP data is checked.
The following table lists the RTCP monitoring fields and their descriptions.
Avaya P330 Manager User Guide
Table 6-2. VoIP resources - QoS Parameters
Field Description
The source of QoS control. This parameter can
only be changed via the CLI. Possible values are:
• Local - The processor uses the local QoS
parameters. If the processor is using the
local QoS parameters, the
, and
DSCP BBE DSCP
configured.
• Remote - The processor receives its QoS
parameters from the Media Gateway
Controller. All QoS parameters are Read-
only.
Priority based on a CoS standard which assigns
rights and privileges to users of a telephony
network. Possible values are 0 - 7.
A type of differentiated service used to provide
guaranteed bandwidth across a network.
If sufficient bandwidth is available, the
Expedited Forwarding class can be used.
The values range are 0 - 63.
A DiffServ class which is used per call to achieve
the greatest possible bandwidth. The values
range between 0 - 63.
802 Priority , EF
fields can be
51