Avaya P330 User Manual page 35

The following table provides a list of the fields in the LAG Configuration
dialog box and their descriptions:
Avaya P330 Manager User Guide
Table 3-3. LAG Configuration Fields
Field Description
The type of ports in the selected LAG.
The administrative state of the selected LAG:
• - The LAG is enabled and can
transmit and receive packets.
• - The LAG is disabled and
cannot transmit or receive packets.
The configured state of the Auto-Negotiation
protocol between two stations. When enabled,
Auto-Negotiation detects the highest common
denominator for communication between
endstations, and sets both to the same highest
common setting. It also delivers remote link
status.
For LAGs with 10BaseT and 100BaseT ports,
Auto-Negotiation determines the speed and
Duplex Mode of communication between the
endstations. For LAGs with Gigabit ports,
Auto-Negotiation determines the Flow
Control setting of the ports.
The state of communication of the selected
LAG. Possible values are:
• - The LAG can send and
receive simultaneously.
• - The LAG can either receive
or send, but can not do both
simultaneously.
A list of fault messages.
The flow control values advertised by the
ports on the selected LAG. These values limit
the flow control possibilities to be decided by
Auto-Negotiation.
The state of flow control on the selected LAG.
The name of the LAG.
25