Avaya P330 User Manual page 138

The IP Multicast Filtering dialog box enables you to configure IP Multicast
filtering parameters on the Avaya P330 Device.
The following table provides a list of the fields in the IP Multicast Filtering
dialog box and their descriptions:
To change the IP Multicast filtering configuration for the Avaya P330
Device, change the IP Multicast filtering parameters.
To apply the changes, click
To refresh the information in the IP Multicast Filtering dialog box, click
128
Table 13-1. IP Multicast Filtering Parameters
Field
.
Description
The mode of operation of the IP Multicast
Filtering on the device. Possible Modes are:
• - IP Multicast Filtering is enabled
on the device.
• - IP Multicast Filtering in not
enabled on the device.
The amount of time (in seconds) allowed to
pass from a router's last IP Multicast request
before the device stops forwarding all multicast
sessions to a router. The valid range for this
parameter is 30 - 7200 seconds.
The amount of time (in seconds) the device
waits from receiving a request for a new IP
Multicast session until IP Multicast filtering
begins. This time allows other hosts to report to
the device. The valid range for this parameter is
1 - 300 seconds.
.
Avaya P330 Manager User Guide