Avaya P330 User Manual page 178

* Note: In the Send field, selecting '
You can modify RIP interfaces. For more information on editing tables,
refer to
168
Table 21-8. RIP Interface Parameters (Continued)
Field
prevent updating the
"Editing Tables" on page
Description
What the device sends on this interface. Values
are:
• - RIP updates contain the entire
routing table.
•
only a single entry. This advertises the
router as the default router.
• - No RIP updates are sent.
The cost of using this interface. RIP chooses the
route with the lowest total cost (metric) for
each destination.
The metric of the default route entry in RIP
updates originated on this interface, if
configured to
If , accepts default route entries in RIP
messages received from other routes on this
interface. If , does not accept default
route entries in RIP messages received from
other routes on this interface.
The method for handling routes learned from
this interface, when sending updates to this
interface. Possible methods are:
•
advertised to this interface as unreachable.
• - The routes are not
advertised to this interface at all.
• - The routes are advertised to this
interface as is.
Authentication Type. Possible methods are:
The password for this interface. This is only
used if the is set to
Auth Type
The password may contain up to 16 characters.
It may be configured here, but not viewed.
Default Route Metric
148.
- RIP updates contain
.
- The routes are
' or ' ' will
field.
Avaya P330 Manager User Guide
.