Alternate.wall.installations - Friedrich 920-087-09 (12/10) Installation And Operation Manual

Alternate Wall Installations
Figure 4
Panel Wall
OPTIONAL SUBBASE
LEVELING SCREW
Figure 5
Frame and Brick Veneer
WOOD FRAME
OPTIONAL SUBBASE
LEVELING SCREW
NOTE:. Follow.all.wall.system.manufacturer.installation.instructions...For.sunrooms.and.modular.buildings,.adhere.to.their.installation.instructions.for.
supporting.and.sealing.sleeve.to.their.frames...All.wall.and.window/wall.installations.must.provide.for.proper.drainage...In.applications.where.the.
drain.holes.on.the.PTAC.wall.sleeve.are.not.exposed.beyond.the.wall.an.internal.drain.system.is.recommended...It.is.the.installer's.responsibility.
to.ensure.there.is.adequate.drainage.for.the.PTAC.unit.
FRP003
1/4" MIN
PROJECTION
STEEL
LINTEL
11" MIN.
WITH SUBBASE
FRP005
Figure 6
Curtain Wall
CASE FLANGE
(BY OTHERS)
OPTIONAL SUBBASE
LEVELING SCREW
Figure 7
Block and Brick Veneer
CONCRETE LINTEL
RECEPTACLE
FINISHED FLOOR
1/4" MIN
WALL OR
PROJECTION
WINDOW
FRP004
1/4" MIN
PROJECTION
STEEL
LINTEL
13-3/4" MIN.
WITHOUT SUBBASE
POWER SUPPLY CONDUIT
(SUPPLIED BY INSTALLER)
FRP006
7