Honeywell VisionPRO 8000 Product Data page 27

2. Press Up or Down arrow next to the Time key to set
desired time for the thermostat to resume schedule.
TUE
FAN
Inside
AUTO
SYSTEM
Hold Temperature
HEAT
Until
PM
SCHED HOLD
3. Press the Cancel or Sched key to cancel "Hold
Temperature Until" and resume schedule.
NOTE: Once "Hold Temperature Until" time is reached, the
thermostat shows "Following Schedule" on the
screen to indicate that "Temporary Hold" has ended.
PERMANENT HOLD
Permanent Hold changes the temperature setting until
Permanent Hold is cancelled.
1. Press Hold key. "Permanent Hold" appears on the
screen.
2. Press Up or Down arrow next to the temperature you
want to set during "Hold."
TUE
FAN
Inside
AUTO
SYSTEM
HEAT
AM
Permanent
Hold
SCHED HOLD
3. Press Cancel key to cancel "Permanent Hold" and
resume the schedule.
VACATION HOLD
Changes temperature setting for a designated number of
days.
1. Press the Up and Down arrow keys to set the desired
temperature while away on vacation. Notice that "Hold
Temperature Until" time is shown on the screen. (This is
the time the Vacation Hold override expires after the
number of days ends.)
2. Press Hold key twice. Screen shows "Hold Temperature
Until" one day.
Set To
CLOCK SCREEN
CANCEL
M19959
Set To
CLOCK SCREEN
CANCEL
M19960
TM
VisionPRO 8000 Touchscreen Programmable Thermostat
3. Press Up and Down arrow keys to change the number
of Days you desire thermostat to override the schedule.
NOTE: Days Up and Down arrows appear for approximately
seven seconds. Pressing just below Hold Temper-
ature Until on the screen allows the Days Up and
Down arrows to reappear.
FAN
Inside
AUTO
SYSTEM
Hold Temperature
HEAT
SCHED
4. To cancel the Vacation Hold override early, press the
Cancel key.
NOTE: When the number of days of Vacation Hold expires,
the screen shows "Following Schedule" to indicate
that Vacation Hold has ended.
Clean Thermostat Screen
The thermostat has a touch screen interaction. Follow these
steps to clean the screen without making thermostat changes:
1. Press the Screen key. Thermostat locks out all touch
keys for 30 seconds to allow for cleaning.
2. Use damp cloth slightly moistened with water or house-
hold glass cleaner to clean the screen.
3. Repeat the above steps, as necessary.
IMPORTANT
Do not spray any type of liquid directly on the
thermostat itself. If using household glass cleaner,
spray cleaner on cloth. Then use a cloth to clean
the thermostat screen.
4. Press the Done key to return to the Home Screen and
normal operation.
27
THU
Set To
Until
DAYS
CLOCK SCREEN
OK TO
CLEAN
SCREEN
CANCEL
M19961
M19964
68-0280—01