Honeywell VisionPRO 8000 Product Data page 22

TM
VisionPRO 8000 Touchscreen Programmable Thermostat
2. Press and hold the center blank key for approximately
five seconds until the screen changes.
TUE
CHANGE FILTER UV LAMP HUMIDIFIER PAD
Inside
SYSTEM
EM HEAT
OFF
COOL
DONE
3. Release the center blank key when the screen on the
thermostat matches the screen below.
DONE
68-0280—01
Set To
Following
Schedule
PM
CANCEL
M22439
M22440
4. See the screen below to review how the thermostat
keys are used during the User Setup. See Table 5 for
the User Setup numbers and settings.
USER SETUP
NUMBER
MON
DONE O
PRESS TO EXIT
USER SETUP
5. Press the Done key to exit the User Setup screen.
Table 5. User Setup Settings.
User
Setup User Setup
Number
0120 Date (first two
digits of year)
0130 Date (last two
digits of year)
0140 Date (month)
0150 Date (day)
0160 Schedule options
0320 Display
temperature
in °F or °C
0330 Daylight savings
time
22
ADVANCE TO NEXT
USER SETUP
CURRENT
SETTING
WED THU U FRI SAT A A T A SUN
CHANGE THE
CURRENT
SETTING
Name Settings
Select first two digits of
current calendar year (20
for year 2005, etc)
Select last two digits of
current calendar year (05
for year 2005, etc)
Select number of current
calendar month (1-12)
Select number of current
calendar date (1-31)
0—Non-programmable
4—7-day programmable
(factory setting)
0—°F setting (factory
setting)
1—°C setting
1—Daylight savings is on
(factory setting)
0—Daylight savings is off
M19922