Page 1
Night Scout NIGHT VISION BINOCULAR NIGHT SCOUT USER’S GUIDE (REV. 4, JANUARY 2013) u s e r ` s g u i d e Impor tant E xpor t Restrictions ! Commodities, products, technologies and services contained in this manual are subject to one or more of the export control laws and regulations of the U.S.
Page 3
Even if your batteries are low don’t worry the smart series will let you know. Our Night Scout binocular have a 3 button digital control panel that allows the user to easily engage the main power, Infra-red illuminator and the proximity sensor. Color coded LEDs let you know the mode of operation you are using.
Page 4
Night Scout while remaining almost totally invisible to the naked eye. The IR illuminator on the Night Scout is located on the side of the unit. To turn the IR on, push the IR button and you will see an orange indicator light come on. It is important to remember that the IR illuminator is simply an infra red light source, and like any light source it may loose its efficiency over a great distance.
• Have fun and enjoy. CLEANING THE EYEPIECE You may need to clean the eyepiece of the Night Scout from time to time in order to guarantee top performance. When you receive your Night Scout you should check for dust on the eye- piece of the unit.
WARNINGS AND CAUTIONS • Always remember to turn off the Night Scout when it is not in use. If you do not plan on using your device for a period of more than 10 days, you should remove the batteries.
ATN, at its option, will ei- ther repair or replace the product, and such action on the part of ATN shall be the full extent of ATN’s li- ability, and the Customer’s sole and exclusive remedy. This warranty does not cover a product (a) used in other than its normal and customary manner;...