ATCOM AT840 series User Manual page 30

AT8 AT8 AT8 AT84 4 4 4 0 0 0 0 Series Series Series Series User User User User Manual
protocol.
� User Prefer Codec Only: Only use the preferred codec for all calls. The call will fail if the far
end does not support this codec.
� DTMF Tx Method: select the method to transmit DTMF signals to the far end: Inband, rfc2833,
INFO. Defaults to RFC2833.
� � � � Call Call Feature Feature Setting Setting
Call Call Feature Feature Setting Setting
� Message Waiting: whether to prompt if there is a voicemail.
Voice Mail Number: if you set voicemail number, then you can just press the voicemail key to
�
auto dial voicemail number then enter voicemail box.
� Pickup Service Code: set Pickup Service Code according to the service settings.
UDP Keep Alive Enable: Enabel UDP keep alive, to detect if the server is still available.
�
� UDP Keep Alive Intvl: Set expire time of the keep alive UDP.
� Default Ring: which ring to select for this account.
SRTP: Secure Real Time Control Protocol.
�
� � � � Dial Dial Plan Plan
Dial Dial Plan Plan
� Dial Plan: Configure dial rule for this sip account, please refer to
ATCOM TECHNOLOGY CO., LIMITED
Manual Manual Manual
dial
www.atcom.cn
plan.
30