Table of Contents
Advertisement
2.1.3 LED Indications
LED
Power
Power 1
Power 2
LNK/ACT
(port 7&8 of ISW-800,
port 5 of ISW-500)
FDX/COL
(port 7&8 of ISW-800,
port 5 of ISW-500)
LED Indicator
(port 1 ~ 6 of ISW-800,
port 1 ~ 4 of ISW-500)
Status
Meaning
When the industrial switch has power input s the LED
Green
will light on
Off
No any power inputs
Green
Power on
Off
No power inputs
Green
Power on
Off
No power inputs
Green
The port is linking with its link partner
The port is transmitting or receiving packets from the TX
Blinks
device.
Off
No device attached
Orange
The port is operating in full-duplex mode.
Blinks
Collision of Packets occurs in the port.
Off
The port in half-duplex mode or no device attached
Orange
The port is operating in full-duplex mode.
Blinking
Collision of Packets occurs.
(Orange)
Off
The port is in half-duplex mode or no device is attached.
Green
A network device is detected.
Blinking
The port is transmitting or receiving packets from the TX
(Green)
device.
Off
No device is attached.
Advertisement
Table of Contents
