Wall Mount Plate Mounting - Planet ISW-500 User Manual

Step3: Check the DIN-Rail is tightly on the track.
Step4: To remove the industrial switch from the track, reverse steps above.

2.2.2 Wall Mount Plate Mounting

To install the switch on the wall, please follows the instructions described below.
Step1: Remove the DIN-Rail from the industrial switch; loose the screws to remove the DIN-Rail.
Step2: Place the wall mount plate on the rear panel of the industrial switch.
Step3: Use the screws to screw the wall mount plate on the industrial switch.
Step4: Use the hook holes at the corners of the wall mount plate to hang the industrial switch on the wall.
Step5: To remove the wall mount plate, reverse steps above.