Mounting Installation - Planet ISW-500 User Manual

2.2 Mounting Installation

This section describes how to install the Ethernet Switch and make connections to it. Please read the
following topics and perform the procedures in the order being presented.
2.2.1 DIN-Rail mounting
The DIN-Rail is screwed on the industrial switch when out of factory. If the DIN-Rail is not screwed on the
industrial switch, please see the following figure to screw the DIN-Rail on the switch. To hang the
industrial switch, follow the below steps:
Step1: Insert the top of DIN-Rail into the track.
Step2: Lightly push the button of DIN-Rail into the track.