Vlan Setting Example - Planet FNSW-1608PS User Manual

5.4.1 VLAN setting example:

VLAN scenario
1. Port 16 is the file server port for all the workstations
2. Port 1 to port 15 is different devices that do need to see each other
Setup steps
1. Port Setting
1.1 Assign VLAN 1 as the default VLAN group for all ports
1.2 Assign VLAN 2 for the second VLAN group with port 1 and port 16
1.3 Repeat the same steps for port 2 to port 15. i.e. 2 & 16, 3 & 16, ....., 15 & 16
2. PVID setup
2.1 Assign "1" (i.e. ID of VLAN 1) to port 16 as its PVID (Port VLAN ID).
2.2 Assign "2" to port 1 as its PVID
2.3 Repeat above steps for port 2 to port 15 with its PVID, i.e. 3 (port 2), 4 (port 3), to 16 (port 15)
After the above steps port 1 to port 15 is being separated physically due to it belongs to different VLAN groups
(different VLAN). However, they all can access port 16 due to port 16 is using PVID 1 to communicate with port
1 to port 15. This configuration (for VLAN 1 to VLAN 4) can be found in
Figure 5-6 FNSW-1608PS port-based VLAN Setting Web Page screen
Figure 5-7 FNSW-1608PS port-based VLAN Setting Web Page screen
Figure 5-6.
- 39 -