Hardware Description; Front Panel; Rear Panel - Planet FNSW-1608PS User Manual

This product provides two different running speeds – 10Mbps, 100Mbps in the same switch and automatically distinguishes
the speed of incoming connection.
This section describes the hardware features of FNSW-1608PS. For easier management and control of the Switch, fa-
miliarize yourself with its display indicators, and ports. Front panel illustrations in this chapter display the unit LED
indicators. Before connecting any network device to the FNSW-1608PS, read this chapter carefully.

2.1 Front Panel

The Front Panel of the FNSW-1608PS PoE Web Smart Ethernet Switch consists of 16x Auto-Sensing 10/100Mbps
Ethernet RJ-45 Ports. The LED Indicators are also located on the front panel of the FNSW-1608PS.
2.1.1 LED indicators
System
LED Color
PWR Green
Per 10/100Mbps port
LED Color
PoE in-use Green
LNK/ACT Green
100 Green

2.2 Rear Panel

The rear panel of the FNSW-1608PS indicates an AC inlet power socket, which accepts input power from 100 to 240V AC,
50-60Hz, and 1A max. And one console port at rear panel for switch management.
Power Notice:
1. The device is a power-required device, it means, it will not work till it is powered. If your networks should active all the
time, please consider using UPS (Uninterrupted Power Supply) for your device. It will prevent you from network data
loss or network downtime.
2. In some area, installing a surge suppression device may also help to protect your FNSW-1608PS from being damaged
by unregulated surge or current to the FNSW-1608PS.
Figure 2-1: FNSW-1608PS Switch front panel
Lights to indicate that the Switch has power.
Lights to indicate the port is providing 48VDC in-line power. (1-8 ports)
Lights to indicate the link through that port is successfully established.
Lights to indicate the port is running in 100Mbps speed.
Figure 2-2: FNSW-1608PS Switch rear panel

2. HARDWARE DESCRIPTION

Function
Function
100~240V AC
50 / 60Hz
- 7 -