Getting Started; General Guidelines - Planet FNSW-1608PS User Manual

4.4 Getting Started

4.4.1 General Guidelines

The FNSW-1608PS allows users to configure the device via command line under console interface. Please type "help" or
"?" for all available commands in the"FNSW-1608PS>" prompt. The screen of available commands in
pears, and the detail description shown in table 4-1.
Command
Show port [n] / all
Show VLAN [n]
Show trunk
Show IP
Show system
Show PoE status[n]
Show PoE(n)
Show management VLAN
Show VLAN mode
Show PVID
Show Priority
Set port [n]
Figure 4-4 FNSW-1608PS available commands screen
Description
Show per port or all port current status of FNSW-1608PS.
Show current VLAN group status of FNSW-1608PS.
Show current trunk group status of FNSW-1608PS.
Show current IP subnet address of FNSW-1608PS.
Show firmware version, Mac address and IP address of FNSW-1608PS.
Show per PoE port status( On or Off) of FNSW-1608PS.
Show per PoE port disable/enable status and priority of FNSW-1608PS.
Show current management VLAN of FNSW-1608PS.
Show current VLAN mode of FNSW-1608PS.
Show per port PVID of FNSW-1608PS.
Show current priority status of FNSW-1608PS.
Set per port auto-negotiation speed duplex mode, QoS and bandwidth control, Insert priority
tagging function of FNSW-1608PS.
Figure 4-4 ap-
- 15 -