Port Trunk Setup - Planet FNSW-1608PS User Manual

5-5 Port Trunk Setup

This section allows you to disable or enable trunk function of two ports or four ports together to speed up data transmission.
The screen in Figure 5-8 appears.
Figure 5-8 FNSW-1608PS Port Trunk Setup Web Page screen
Notice:
After turn on the port trunk feature, port 1 and port 2 or port 13,14,15,16 should connect to another switch,
such as another FNSW-1608PS, that also supports port trunk feature to double the bandwidth in between.
Otherwise, if the connected switch do not support port trunk, it will cause network loop and hangs the whole
network.
- 40 -