Planet FNSW-1608PS User Manual page 24

This set command list contains ten items:
Set port [n]: Please refer to chapter 4.4.3.1.
Set trunk: Please refer to chapter 4.4.3.2.
Set vlan [n]: Please refer to chapter 4.4.3.3.
Set poe [n]: Please refer to chapter 4.4.3.4.
Set management vlan: Please refer to chapter 4.4.3.5
Set vlan mode: Please refer to chapter 4.4.3.6
Set pvid: Please refer to chapter 4.4.3.7
Set priority: Please refer to chapter 4.4.3.8
Set ip xxx.xxx.xxx.xxx.mmm.mmm.mmm.mmm.ggg.ggg.ggg.ggg: Please refer to chapter 4.4.3.9
Set pass: Please refer to chapter 4.4.3.10
4.4.3.1 Set port [n]
This command allows configuring per port parameters of FNSW-1608PS. the correct usage is shown as below:
Set port [n]: n=1-16, to configuring per port parameters of FNSW-1608PS. The configuring per port parameters screen in
Figure 4-19 appears and the detail description shown in table 4-2.
Figure 4-19 Port Configuration screen
- 24 -