Switch Management; Overview - Planet FNSW-1608PS User Manual

16-port 10/100mbps with 8-port poe web smart ethernet switch
Hide thumbs Also See for FNSW-1608PS:
Table of Contents

Advertisement

This chapter describes how to manage the FNSW-1608PS. Topics include:

- Overview

- Management methods
- Assigning an IP address to the FNSW-1608PS
- Logging on to the FNSW-1608PS
3.1 Overview
The FNSW-1608PS provides a user-friendly, command line under console interface. Using this interface, you can perform
various switch configuration and management activities, including:
Command
Show port [n] / all
Show VLAN [n]
Show trunk
Show IP
Show system
Show PoE status[n]
Show PoE(n)
Show management VLAN
Show VLAN mode
Show PVID
Show Priority
Set port [n]
Set Trunk
Set VLAN(n)
Set PoE[n]
Set management VLAN
Set VLAN mode
Set PVID
Set priority
Set IP xxx.xxx.xxx.xxx, mmm.
mmm, mmm, mmm,
ggg.ggg.ggg.ggg
Set Pass
Factory Default
Reboot
Logout
Description
Show per port or all port current status of FNSW-1608PS.
Show current VLAN group status of FNSW-1608PS.
Show current trunk group status of FNSW-1608PS.
Show current IP subnet address of FNSW-1608PS.
Show firmware version, Mac address and IP address of FNSW-1608PS.
Show per PoE port status( On or Off) of FNSW-1608PS.
Show per PoE port disable/enable status and priority of FNSW-1608PS.
Show current management VLAN of FNSW-1608PS.
Show current VLAN mode of FNSW-1608PS.
Show per port PVID of FNSW-1608PS.
Show current priority status of FNSW-1608PS.
Set per port auto-negotiation speed duplex mode, QoS and bandwidth control, Insert priority
tagging function of FNSW-1608PS.
Disable or enable trunk group of FNSW-1608PS.
Configure port-based VLAN group of FNSW-1608PS.
Configure per PoE port of FNSW-1608PS.
Assign management VLAN of FNSW-1608PS.
Disable or enable port-based VLAN function of FNSW-1608PS.
Assign PVID on each port of FNSW-1608PS.
Allow to configure the priority setting of FNSW-1608PS.
Assign IP address, subnet mask, gateway of FNSW-1608PS.
Change the default password of FNSW-1608PS, the maximum length is 4 characters.
Reset the FNSW-1608PS to factory default mode.
Reboot the FNSW-1608PS.
Logout console interface of FNSW-1608PS.

3. SWITCH MANAGEMENT

- 10 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents