Model 3324 User Guide
Speed Status
•
Config: Displays user configured port settings 1-24 at 5/10/15 Mbps and port 25/26 at 10/100/1000 Mbps
•
Actual: Displays the actual line rate the individual links have achieved
Duplex Status
•
Config: Displays user configured Full or Half-Duplex Mode
•
Actual: Displays which mode is actually being achieved
Flow Control
Full-Displays the flow control status as enabled ON or disabled OFF
•
Half: Displays the backpressure is in enabled ON or disabled OFF
•
Actual: Displays what flow control is being used
Rate Control
•
Ing: Displays the port effective ingress rate of user setting
•
Egr: Displays the port effective egress rate of user setting.
Port Security
•
Displays if a port is receiving Priority. If it is, it will read Enabled, if not, Disabled
•
Port Security: Displays the user setting, it is either OFF or ON
Note
From this Port Status you can read the following:
•
Port: This is the port # you have double-clicked
•
State:
•
Link:
Remote Network Management
To read a specific port's information double-click on the port # you
wish to examine.
3 • Configuring the 3324 for operation
37