Max Bridge Transit Delay Bound Control; Broadcast Storm Filter; Priority Queue Service Settings; First Come First Service - Patton electronics 3324 Getting Started Manual

3 • Configuring the 3324 for operation Model 3324 User Guide

Max Bridge Transit Delay Bound Control

Limits the packets queuing time in the concentrator. When enabled the packets queued past the time limit will
be dropped. The valid time limits are 1 second, 2 seconds, 4 seconds, and off. (Default is 1 second)

Broadcast Storm Filter

To configure Broadcast Storm Control, enable it and set the upper threshold for the individual ports. The
threshold is the percentage of the port's total bandwidth used by broadcast traffic. When broadcast traffic for a
port rises about the threshold, the broadcast storm control will become active. The valid range is 5%, 10%,
15%, 20%, 25%, and OFF.

Priority Queue Service Settings

First Come First Service

The sequence of packets sent is dependent on the order the packets arrived.

All High Before Low

The high priority packets are sent before the low priority packets.

WRR (Weighted Round-Robin)

Select the preference given to packets in the 3324's high-priority queue. These options represent the number
of high priority packets that will be sent before one low priority packet is sent. For example, 5 High/2 Low
means that the 3324 will send the 5 high priority packets before sending the 2 low priority packets.
40 Administrator