Table of Contents
Advertisement
Model 3324 User Guide
3. On the Connect To window (see
(where the X refers to the number identifying the RS-232 serial port on the PC). In the following proce-
dure, Com1 will be the used as the port identifier.
4. Click on
.
OK
5. The COM1 Properties window displays.
6. Configure your COM port settings as shown in
– Set Bits per second at 9600 to the content window.
– Set Flow control at None
7. Click on the
menu, then select
File
Initial configuration through the RS-232 control port
Figure 8. Connect To window
figure
8), set Connect using: to one of the options named Direct to ComX
figure
9, then click
Figure 9. COM1 Properties window
.
Properties
3 • Configuring the 3324 for operation
.
OK
31
Advertisement
Table of Contents
