Default Server - Patton electronics SmartNode Series Software Configuration Manual

Software for smartnode series

Hide thumbs Also See for SmartNode Series:

Table of Contents

SmartWare Software Configuration Guide

Default Server

Additionally, the default server can be set to auto so that actual registrar is always taken as default server. When

both are set to auto, the registration mechanism discovers the registrar and the address of the discovered regis-

trar is also taken as default server. When set to manual, the default server can be set to a ﬁxed address.

Mode: gateway sip <gateway>/service <service>

[ name ] (svc-sip)[service]#[no] default

server ( (manual <host> [<port>]) | auto )

[ loose-router | strict-router ]

Gateway configuration task list

45 • SIP gateway configuration

Set IP address with optional port, which is

used as default server. Auto sets the default

server always to the actual registration con-

tact, and updates when a new contact is

treated as registrar.

Do you have a question about the SmartNode Series and is the answer not in the manual?

Smartware release 4.2