Enable Push-Back - Bridge Service; Enable Push-Back - Distribution-Group Service; Enable Push-Back - Hunt Group Service; Enable Push-Back - Limiter Service - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide
Enable push-back – bridge service.
Mode: context cs/service bridge
Step Command
[ name ](svc-brdg)[ service ]#[no]
1
allows-push-back
Enable push-back – distribution-group service.
Mode: context cs/service distribution-group
Step Command
[ name ](svc-dist)[ service ]#[no]
1
allows-push-back
Enable push-back – hunt group service.
Mode: context cs/service hunt-group
Step Command
[ name ](svc-hunt)[ service ]#[no]
1
allows-push-back
Enable push-back – limiter service.
Mode: context cs/service limiter
Step Command
[ name ](svc-lim)[ service ]#[no]
1
allows-push-back
Enable push-back – priority service.
Mode: context cs/service priority
Step Command
[ name ](svc-prio)[ service ]#[no]
1
allows-push-back
Call router configuration task list
Enables push-back of a call of this service.
Default is disabled.
Enables push-back of a call of this service.
Default is disabled.
Enables push-back of a call of this service.
Default is disabled.
Enables push-back of a call of this service.
Default is enabled.
Enables push-back of a call of this service.
Default is enabled.
40 • Call router configuration
Purpose
Purpose
Purpose
Purpose
Purpose
511