Patton electronics SmartNode Series Software Configuration Manual page 553

SmartWare Software Configuration Guide
Mode: gateway sip/service
Step
1 [ name ] (svc-sip)[service]# use profile sip
name
Mode: interface sip
Step
[ name ] (if-sip)[ name ]# use profile sip name Specifies the usage of a specific SIP profile
1
Gateway configuration task list
Command
Command
45 • SIP gateway configuration
Purpose
Specifies the usage of a specific SIP profile
on this gateway. If no profile is configured,
profile "default" is used.
Purpose
on this interface. If no profile is configured,
profile "default" is used.
553