Table of Contents
Advertisement
Error Messages
No.
E02431 DSP error. Reproduction and
record cannot be performed.
E02432
E02440 System error
Couldn't format P2 cards.
E02441 Couldn't format P2 cards.
E02442 Found read only P2 cards.
Couldn't format.
E02443 Not P2 card.
Couldn't format.
E02444 No card.
Couldn't format.
E02460 System error
Couldn't delete files.
E02461 Couldn't delete files.
E02470 System error
Couldn't restore files.
E02471 Couldn't restore files.
E02481 Write error on slot1.
Record cannot be continued.
E02482 Write error on slot2.
Record cannot be continued.
E07671 Camera communication error.
Camera cannot be controlled.
E08601 Lid open.
Reproduction and record
cannot be performed.
E08602 The recorder's fan has
stopped.
E10400 Radar model file not found.
E10401 More than five radar model
files found.
E10402 Invalid radar model file
found.
E10403 Radar model file read error.
E10410 Radar communication error.
Please check the radar
setting.
Message
Measure
Wait until the error message is cleared.
Call your supplier if the message does
not clear after about a minute.
Insert another P2 card.
Disable P2 card write-protection.
The inserted card is not a P2 card.
Replace the card with a P2 card.
Insert a P2 card.
Contact your supplier.
Be sure to use the correct procedure
to remove and load P2 cards. Replace
a P2 card that is not recognized after
inserting it in the P2 card slot and
closing the P2 card slot cover.
The Color Camera may not be correctly
connected. Check whether the camera
cable (included in the Color Camera)
is correctly connected to the Color
Camera. Call your supplier if this
measure does not solve the problem.
Close the P2 card slot cover.
Contact your supplier.
55
Advertisement
Chapters
Table of Contents
