Selecting Audio2 Input; Checking Audio; Viewing Memory Card Video Recorder Status - Panasonic AG-RCP30P Operating Instructions Manual

Viewing Live Video

Selecting AUDIO2 input

1. Press the [MENU] button.
The Menu appears.
2. Use the [ , ] buttons to select
[Audio] and press [
confirm the entry.
3. Use the [ , ] buttons to select
[Audio2 Select].
4. Use the [ , ] buttons to select
"INCAR" or "WMIC".
INCAR :
Sound input through the [IN CAR
MIC] terminals
WMIC (Wireless Microphone) :
Sound input through the [AUDIO
IN 2] terminals

Checking audio

Sound output is normally off when
viewing live video. Use the following
steps to check that sound is input
normally.
1. Press the [MENU] button.
The Menu appears.
2. Use the [ , ] buttons to
select [Audio] and press [
to confirm the entry.
3. Use the [ , ] buttons to select
[Audio1 Test] or [Audio2 Test],
and then press the [
Sound is output while the [
is depressed.
Note:
The output sound may be too loud
depending on the sound volume
setting. Lower the sound volume as
required.
(continued)
The following function is provided to
enable viewing Memory Card Video
Recorder status and GPIO status.
1. Press the [MENU] button.
] to
The Menu appears.
2. Use the [ , ] buttons to select
[Setup/Info] and press [
confirm the entry.
3. Use the [ , ] buttons to select
[On Screen Type].
4. Use the [ , ] buttons to select
"SIMPLE", "DETAILS" or "OFF".
SIMPLE:
DETAILS:
OFF:
Notes:
• The administrator can set the
• See the next page for how to read
]
] button.
] button

Viewing Memory Card Video Recorder status

The simple On-Screen Display
appears.
The detailed On-Screen Display
appears.
The On-Screen Display closes.
Overlay OSD (Init On Screen Type)
selected at power-on.
the On-Screen Display.
] to
21