Date/Time; Registration - Panasonic AG-RCP30P Operating Instructions Manual

P2 remote control panel, car use only
Hide thumbs Also See for AG-RCP30P:
Table of Contents

Advertisement

Administrator Setup
Notes:
• The start time must be set to a
time that comes at or later than
the stop time for the previous day.
• When the stop time is set to the
same time as the start time or to a
time prior to the start time, the stop
time will be set for the next day.
• Even at a time outside of the set
start time and stop time period,
recording will start if the recording
start criteria is met, for example,
when a recording trigger is input
or the [REC] button is pressed.
• Programmed recording will start
if the power is turned on in the
period between the start time and
stop time.
• If auto maintenance is performed
during programmed recording,
recording will be interrupted for 40
to 50 seconds.

Date/Time

TimeZone
Indicates time difference from world
standard time.
Hawaii
: Hawaiian standard time
Yukon
: Alaska standard time
Yukon DST : Alaska daylight saving time
Pacific
: Pacific standard time
Pacific DST : Pacific daylight saving time
Mountain : Mountain standard time
Mountain DST : Mountain daylight saving time
Central
: Central standard time
Central DST : Central daylight saving time
Eastern
: Eastern standard time
Eastern DST : Eastern daylight saving time
Atlantic
: Atlantic standard time
Atlantic DST : Atlantic daylight saving time
Asia Tokyo : Japan standard time
(continued)
Style
Use this function to set a date format.
ISO : YYYY-MM-DD
HH : MM : SS
USA : MM/DD/YYYY
HH : MM : SS
Date/Time
Set
Set [Date/Time] and press [Set] to confirm.
Setting : Year/month/day

Registration

Load Admin
Use this function to load administrator
data from a USB memory device,
overwriting any existing administrator
data.
Note:
No administrator data is registered
when shipped from the factory.
List Admin
Use this function to view the IDs of
administrators and officer names
already registered in the Memory
Card Video Recorder. Use the [ , ]
buttons to go between pages.
Load Officer
Use this function to load officer
data from a USB memory device,
overwriting any existing officer data.
Note:
No officer data is registered when
shipped from the factory.
List Officer
Use this function to view the IDs of
officers and officer names already
registered in the Memory Card Video
Recorder. Use the [ , ] buttons to
go between pages.
hour : minute : second
35

Advertisement

Table of Contents
loading

Table of Contents