Trigger; Osd - Panasonic AG-RCP30P Operating Instructions Manual

Administrator Setup

Trigger

GPIO
Use this function to turn GPIO on
or off.
Setting : ON/OFF
Trigger1 - 7
< Detection >
Enter conditions for detection of triggers
1 – 7. Set unused triggers to "N".
N : Input disabled
H : High-edge trigger
Level H : High-level trigger
L : Low-edge trigger
Level L : Low-level trigger
B : Double-edge trigger
< OSD >
Use this function to determine whether
or not GPIO signal status should be
indicated in the On-Screen Display.
Setting : ON/OFF
< Printable >
Use this function to assign a letter to
be shown on the On-Screen Display.
Setting : A - Z, –
Note:
The selected font appears when
<OSD> is set to "ON" and the GPIO
signal is high.
Trigger8
< Detection >
Enter conditions for detection of
trigger 8. When not used, set to "N".
N : Input disabled
H : High-edge trigger
Level H : High-level trigger
L : Low-edge trigger
Level L : Low-level trigger
B : Double-edge trigger
SPEED : Detects vehicle speed
< OSD >
Use this function to turn On-Screen
Display on or off.
Setting : ON/OFF
36
(continued)
< Printable >
Use this function to assign a letter to
be shown on the On-Screen Displays.
Setting : A - Z, –
Notes:
• When SPEED is selected, the
On-Screen Display (OSD) setting
and printable letters (Printable)
setting are both "–", and cannot
be changed. Also, the screen is
not displayed.
• C h e c k t h e p u l s e f r e q u e n c y
described on page 39 before
selecting SPEED. Turning SPEED
"ON" using an incorrect frequency
will generate an abnormal trigger.

OSD

OSD
Use this function to set whether the
On-Screen Display appears on the
screen and is included in record files.
Setting : ON/OFF
Display Position
Use this function to set the display
position for the On-Screen Display on
the screen and in record files.
L-Upper
R-Upper
L-Bottom : Lower left
R-Bottom : Lower right
Trigger
Use this function to turn trigger
display on or off upon GPIO 1 to 8
inputs.
Setting : ON/OFF
Note:
The Detailed On-Screen Display
(see pages 22 and 28) will hide this
indication.
: Upper left
: Upper right