Basic Menu Operations - Panasonic AG-RCP30P Operating Instructions Manual

Basic Menu Operations

Use the LCD panel menus for operations and settings that cannot be performed
with the front panel buttons.
A list of all menus is provided on pages 44 to 51.
(This list also describes menus available only to administrators.)
Example: Test of Audio1
1. Press the [MENU] button.
The Menu appears.
A triangle displayed at the right
edge of a menu item indicates that
it contains a submenu.
Menu
Camera
RecCheck
Audio
Archive
Setup/Info
Restore
2. Use the cursor buttons [ , ]
to select an item.
Menu
Camera
RecCheck
Audio
Archive
Setup/Info
Restore
3. Press the center position of
the cursor button [
to confirm the entry.
The selected item opens to reveal
selection details.
Audio
Audio2 Select
INCAR
Audio1 Test (Press ENTER Key)
Audio2 Test (Press ENTER Key)
14
4. Use the [ , ] buttons to select
[Audio1 Test].
Audio
Audio2 Select
Audio1 Test (Press ENTER Key)
Audio2 Test (Press ENTER Key)
5. Press the [ ] button to confirm
the entry.
The Audio1 test is now ready to run.
Use the [ , , , ] buttons to
set a value.
• A selected item with tiny triangles
(Screen example)
Trigger
Trigger1
Trigger2
Trigger3
] or [ ]
Trigger4
Trigger5
Trigger6
Trigger7
Trigger8
• A selected item with tiny triangles
(Screen example)
AE[-2 -- +2]
INCAR
at the top and bottom allow you to
change its value by pressing [ ]
or [ ].
GPIO
Detection
N
N
N
N
N
N
N
N
to the left and right allow you to
change its value by pressing [ ]
or [ ].
0
ON
OSD Printable
-
OFF
-
OFF
-
OFF
-
OFF
-
OFF
-
OFF
-
OFF
OFF -