Programming or Retrieving Parameters via Email
To Retrieve the Internet Parameters for Backup
To retrieve the existing Internet Parameters, send a plain text email to the DP-2500/3000's email address with
the following command in the "Subject:" line:
#get parameters(password)# : Where the "password" is the Remote Password programmed in the DP-
Retrieving the Internet Parameters Sample
(1) To
From
Subject
2500/3000's User Parameters (i.e. 123456789). For security, always input a
Remote Password in the User Parameters. If it was not programmed, signify
with "()" (i.e. #get parameters()#).
Make sure that the "Cc..., Bcc...". lines and the body of the email message is
Blank.
(1)
: The DP-2500/3000's email address.
: This field is normally not visible when creating new email message(s). It is your default
email address for retrieving the Internet Parameters and for error message notification.
(Can be programmed with the configuration tool of your email program.)
: To Retrieve data, type: #get parameters(password)#
INSTALLING YOUR MACHINE
31